MPhil Thesis

Browse

Search Results

Now showing 1 - 10 of 21

Fabrication of Zinc Oxide (ZnO) Nanorods on Aluminium Doped ZnO (AZO) Seeding Layers
(© University of Dhaka, 2026-03-03) Hossain, Mukul
Aluminium-doped zinc oxide (AZO) thin films and ZnO nanorods (NRs) were synthesized and characterized to explore their structural, optical, and electrical properties. AZO seed layers with varying Al concentrations 2, 3, 5, and 8 mol% were deposited on soda-lime glass via spin coating, followed by hydrothermal growth of ZnO NRs. XRD and SEM confirmed vertically aligned, c-axis-oriented nanorods, with morphology influenced by doping and annealing temperature. Optimal crystallinity was achieved at 250 °C, while higher temperatures led to lattice relaxation and reduced structural quality. Photoluminescence revealed UV near-band-edge emission (~380 nm) and visible deep-level emission (500–700 nm), with DLE intensity suppressed at 8 mol% doping, indicating reduced defect density. Both AZO and ZnO NRs showed high optical transparency, and band gaps ranged from 3.44–3.55 eV (AZO) and 3.05–3.15 eV (ZnO NRs), tunable via Al doping. The electrical conductivity and film thickness were strongly influenced by both Al concentration and annealing conditions. The favorable combination of structural integrity, high transparency, tunable band gaps, and improved conductivity renders these AZO/ZnO nanostructures promising candidates for application in a wide range of optoelectronic devices.
STUDY OF SOME COMMERCIALLY FABRICATED SEMICONDUCTOR P-N JUNCTION CHARACTERISTICS AND CHARACTERIZATION OF IMPURITY LEVELS PRESENT THEREIN
(© University of Dhaka, 2025-09-07) Selima Begum, MS Khondaker
The object of present work has been to study junction properties of some commercially available diodes and transistors. We studied over fifty samples out of which twenty were analyzed in details and are reported here. To study the property of depletion layer of p-n junction we carried out a detail C-V measurement. From this study junction capacitance, depletion width, contact potential etc. have been evaluated. From I-V studies (for forward bias and reverse bias conditions) efficiency factor r? has been estimated for large numbers of diodes. These studies indicate the presence of deep impurity centers in most of the samples. To confirm this we carried out detail investigation to detect defect states, if any, and characterized the defect states whenever found. We have observed the presence many and varied deep states both in Si and Ge. The methods used the states are TSCAP and TSC. for characterizing Ip carrying out the investigation we have to construct fixed and variable temperature system, a constant temperature bath and many electronic circuitry needed for our experiments
DESIGN AND CONSTRUCTION OF A COMPUTER AIDED CAPACITANCE TRANSIENT SPECTROMETER FOR THE STUDY OF DEEP DEFECT CENTRES IN SEMICONDUCTORS
(© University of Dhaka, 2025-09-03) BEGUM, MS ZERINA
The object of the present work has been to design and construct a computer aided transient capacitance spectrometric system for detection and characterisation of deep defect centres in Semiconductor. It is hoped that the spectrometer would be able to detect, identify and characterise the deep defect centres present in semiconductor devices. It is known that the presence of impurities or lattice defects in a semiconductor crystal creates deep defect centres. The defect states are located deep inside the forbidden zone, which may act either as <■_ «electron/hole traps or recombination centres. So these centres influence the electrical and optical properties of a semiconductor. The identification and study of their characteristics and kinetics would facilitate the understanding of physics of the semiconductor and its devices. The basic idea of a DLTS spectrometer is to implement a “rate window”. There are two methods of implementing the rate window: by the use of (i) a double box car averager or (ii) a Lock-in-amplifier. In the present work we have implemented the rate window with the computer aided electronic circuitry based on the basic principle of box car averager. DLTS spectrometer system is a complicated experimental setup and needs sophisticated instrumentation. To develop our spectrometric system we have used a 710 ACER computer. The main component i.e. the heart of our system is a rapid data acquisition system peculiar to our need and purpose which would collect and store data, for subsequent manipulation, record temperature of the system, and capacitance from a capacitance meter. For the system we need various electronics circuitry including S/H circuit^unity gain amplifier, base line restorer, and pulse amplifier. All these units have been developed and constructed in the laboratory. Other experimental devices and setups such as cryostatic set up, sample assembly etc. have been constructed in the laboratory. Interfacing between the analog world and the computer has been made via interfacing unit, the Keithley made 570 system. The variable width pulse generator and the capacitance meter formp other two major component^ our system. The capacitance meter operates at 1MHz. The necessary softwares needed to run the constructed spectrometer based on BASIC High Level language together with a special software Soft500 have been developed to suit our environment and need. In order to test the performance of our spectrometer system we have used hardware based laboratoiy made artificial and software based computer simulated DLTS signals. A few real samples i.e. Si p-n junctions have been examined and DLTS signals could be detected
Electronic structure, band energy, fermi energy and density of states of metals and disordered alloys
(© University of Dhaka, 2025-03-19)
Characterization of chemically deposited copper selenide thin films for solar cell application
(© University of Dhaka, 2025-03-19) ...., Al-mamun
A study of atmospheric turbidity coefficients from measurements of the direct solar radiation
(© University of Dhaka, 2025-03-19) alam khan, Md.feroz
Investigation of the electrical and magnetic properties of conductor-insulator (wcco) Composites
(© University of Dhaka, 2025-03-19) akter bally, Most. Asma

MPhil Thesis

Browse

Filters

Settings

Sort By

Results per page

Search Results